Does anyone know why my mainline is going right through my symbols here? I've tried moving piped equipment and that doesn't help.
Steve Cook
set the type of the post as
Issue — 3 months ago
Steve,
Usually this is due to having customized blocks that are using unusual elements, other than lines and polylines. But these all look like stock symbols. So my next hunch is that those blocks are not at 0 elevation. Beyond that, we'd need the drawing.
--J
Usually this is due to having customized blocks that are using unusual elements, other than lines and polylines. But these all look like stock symbols. So my next hunch is that those blocks are not at 0 elevation. Beyond that, we'd need the drawing.
--J
Thanks Jer. Instead of connecting the mainline to the elements, I tried first drawing the mainline and then plugging the elements in. It looks like something funny is going on. But it's better and I can't deal with it now. Submittal is due. Thanks for your consideration though.
Stevie!!!! Have you tried either sending all of the mainline to the back or bringing all of the blocks to the front?
Bro, How AutoCADdy of you. That would work for solid filled blocks, but not for those without solid fills (Backflow Preventers, Master Valves and Flow Sensors, etc). BTW, you, be and Greg R need to grab a beer together some time soon.
It's actually drawing specific. So, I think that it has to do with a UCS and a DVT. Probably not an issue that most designers run into. It may not be a best practices method of getting some things done.
- Page :
- 1
There are no replies made for this post yet.
Contact
- Land F/X
Our software tailors AutoCAD® to the needs of landscape architects, irrigation designers, and other professionals. We automate your most tedious tasks and ensure accuracy, giving you more time to design.