I was watching a Webinar and saw the PEDIT tool used to convert splines...When I performed the same steps, it would convert the objects but still had the original spline objects in the behind the converted objects.
I was wondering what I was doing different since the Webinar video didn't have the original spline objects after PEDIT tool was performed.
Thanks
Pat
I was wondering what I was doing different since the Webinar video didn't have the original spline objects after PEDIT tool was performed.
Thanks
Pat
Pat, I just tested in a blank drawing with a freshly drawn spline and PEDIT, and it converted the spline without keeping the original.
You would need to send in an example spline in a ticket with the exact steps you're following for me to see if I can replicate to help troubleshoot further.
How to Submit a Technical Support Ticket
You can also try the alternative command, SPLINEDIT, to convert it to a polyline.
-Amanda
You would need to send in an example spline in a ticket with the exact steps you're following for me to see if I can replicate to help troubleshoot further.
How to Submit a Technical Support Ticket
You can also try the alternative command, SPLINEDIT, to convert it to a polyline.
-Amanda
- Page :
- 1
There are no replies made for this post yet.
Contact
- Land F/X
Our software tailors AutoCAD® to the needs of landscape architects, irrigation designers, and other professionals. We automate your most tedious tasks and ensure accuracy, giving you more time to design.