Since we're on the subject of Archiving projects, we too have multiple office locations and different server installs under the same LFX support agreement. This is a result of combining offices into a single unit. While our project LFX files are read from the same LandFX cloud ties to our service support number, when we back up, the file is saved to the local server install. This results in the backups being stored on various servers with different dates. For instance, when a user is updating their LandFX, they are prompted to backup projects. If answered yes, the files are backed up to the server install that LandFX is installed on for that individual user. So, with four different server installs, the LFX files are more than likely backed up in four different locations. But when the project is restored, it only allows the file to come from the local server. There is , in theory, a 25% chance (1 of 4 servers) that this is the most current version. Using this file now can change (revert) all of the current drawings to match the old backed up file. Not the one that was the most current that could be on a different server.
While I had advocated for a single install, we have determined through testing that it takes longer to operate LandFX from a distance. I could go on and on about this, but for this discussion, it's not worth it.
Questions:
1. Will moving to AutoCAD's ACC, would we be able to use it as a server and have all of our users point to a single install on the ACC cloud?
2. How would you recommend that if we are restoring a file that the most current file is actually restored?
3. How can we select multiple files (but not all files) to back up?
4. Is there a way within LandFX to set up where the backups go (Using Server ID's (IP addresses?), not using a drive letter since the corporate has set the drive ID's and for LandFX they are the same unless we remap).
BONUS QUESTION:
Is there a way to filter by partial project numbers yet? We sometimes add a suffix to a PM to identify which office/server the project is pointing to.
Thanks in advance.
While I had advocated for a single install, we have determined through testing that it takes longer to operate LandFX from a distance. I could go on and on about this, but for this discussion, it's not worth it.
Questions:
1. Will moving to AutoCAD's ACC, would we be able to use it as a server and have all of our users point to a single install on the ACC cloud?
2. How would you recommend that if we are restoring a file that the most current file is actually restored?
3. How can we select multiple files (but not all files) to back up?
4. Is there a way within LandFX to set up where the backups go (Using Server ID's (IP addresses?), not using a drive letter since the corporate has set the drive ID's and for LandFX they are the same unless we remap).
BONUS QUESTION:
Is there a way to filter by partial project numbers yet? We sometimes add a suffix to a PM to identify which office/server the project is pointing to.
Thanks in advance.
Jer,
I really appreciate your response. Our relationship allows me to read between the lines. I agree with your ideas and assesment. I remember many, many years ago when we were trying to get our firm to use it as a standard for our LA’s. Of course it was, and is still the best idea. The longer it goes on with this decentralized system, the harder it will be to “fix” this. I’ll not be here for that transition. But I will continue to help others in our office, and any other LA understand how important LandFX is in a design environment as long as I am.
I really appreciate your response. Our relationship allows me to read between the lines. I agree with your ideas and assesment. I remember many, many years ago when we were trying to get our firm to use it as a standard for our LA’s. Of course it was, and is still the best idea. The longer it goes on with this decentralized system, the harder it will be to “fix” this. I’ll not be here for that transition. But I will continue to help others in our office, and any other LA understand how important LandFX is in a design environment as long as I am.
Steve,
I believe the Autodesk ACC is only able to store dwg files, so it doesn't work to store the Land F/X installation. But there are plenty of integrations with it, such as Egnyte, so that could be the way to go.
As for this conundrum of restoring project files, I'd need a bit more color. Primarily, I'm not grasping why projects are being restored so often that this is an issue. But beyond that, I would offer that the backup file saved with the DWG would likely be the best copy to use, so you could just prioritize that backup file rather than hunting through various backup folders.
Clearly the best solution would be to utilize a single Land F/X installation, with a single pool of licenses and project data. But to get there will take an amount of work and dedication to completing the task that I am not so sure your company's IT department is capable of.
As for setting a different backup location, this is the first anyone has suggested that.
And for the bonus question, we do have some enhancements scheduled for the Projects dialog, which will include a search capability.
--J
I believe the Autodesk ACC is only able to store dwg files, so it doesn't work to store the Land F/X installation. But there are plenty of integrations with it, such as Egnyte, so that could be the way to go.
As for this conundrum of restoring project files, I'd need a bit more color. Primarily, I'm not grasping why projects are being restored so often that this is an issue. But beyond that, I would offer that the backup file saved with the DWG would likely be the best copy to use, so you could just prioritize that backup file rather than hunting through various backup folders.
Clearly the best solution would be to utilize a single Land F/X installation, with a single pool of licenses and project data. But to get there will take an amount of work and dedication to completing the task that I am not so sure your company's IT department is capable of.
As for setting a different backup location, this is the first anyone has suggested that.
And for the bonus question, we do have some enhancements scheduled for the Projects dialog, which will include a search capability.
--J
- Page :
- 1
There are no replies made for this post yet.
Contact
- Land F/X
Our software tailors AutoCAD® to the needs of landscape architects, irrigation designers, and other professionals. We automate your most tedious tasks and ensure accuracy, giving you more time to design.