Configure QNAP Server for Land F/X

Step 1 (if necessary): Don't have Land F/X installed already? Install Land F/X

Already have Land F/X installed on one of your computers? Skip to Step 2.

Follow our steps to Install Land F/X using Local Data.

 

On the Destination Folder step, install F/X Server to the location C:\LandFX

Step 2: Open your QNAP

To open your QNAP, type your IP address and port into a Web browser.

example:

192.168.211.34:8080

The default login is:

user: admin
pass: admin

Step 3: Enable MySQL

3A. Click Control Panel on your QNAP server.

3B. In the panel on the left side of your screen, click Applications.

3C. Scroll down in the list of applications, and click SQL Server.

3D. Select the following options:

• Enable MySQL Server
• Enable TCP/IP networking

 

Then click Apply at the bottom of the Control Panel.

Step 4: Install phpMyAdmin

4A. Click the link on the Note to install phpMyAdmin

-OR-

Close the Control Panel and open the App Center.

4B. Scroll down in the pane on the left side of your screen, and click Utilities.

4C. Scroll down to phpMyAdmin, and click Add To QTS.

Step 5: Configure phpMyAdmin

5A. Log in to phpmyadmin by clicking the phpMyAdmin logo from the QNAP homescreen.

   Default login:

user: root
pass: admin

5B. Click the SQL tab to create the Land F/X database.

5C. Enter the following lines one by one, and click GO after each entry:

   CREATE DATABASE landfx;

   CREATE USER ‘ODBC’;

   GRANT ALL ON landfx.* TO ‘ODBC’;

Step 6: Create share point on the QNAP

6A. Open the Control Panel from the QNAP interface.

6B. Click Shared Folders, found under the Privilege Settings.

6C. Click Create, then select Shared Folder from the menu that opens.

6D. Name this folder LandFX.

6E. Click Edit under Configure access privileges for users.

6F. You can add your users here and make sure that they have full Read/Write permissions.

6G. Add the data from the landfx_latest/landfx to the newly created LandFX shared folder on the QNAP. (You can use the QNAP finder utility to find your QNAP on your network if you don't see it.)

6H. Map a network drive to the LandFX folder on the QNAP.

6i. Copy the contents of the LandFX folder created in Step 1 above. (This folder will be at the location C:\LandFX.) Paste the copied items into the LandFX folder you created on your QNAP in step 6D above.

6J. Open the LandFX folder on your QNAP and delete the data subfolder from that location.

Step 7: Configure your workstations

7A. On one of your CAD workstations, navigate to the LandFX folder on your QNAP.

7B. Download the latest Workstation Installer by right-clicking the following link and selecting Save Link As or Save Target As.

7C. Locate the setup_FXWorkstation file you downloaded in Step 2 above. Drag it into the LandFX folder on the QNAP. Run the setup_FXWorkstation file from that folder.

This step will enable the database connection from the QNAP. For more detailed instructions, see our New Workstation Setup article.

7D. Open CAD, and load the LandFX menus if they are not automatically preloaded.

7E. Type REACTIVATE in the Command line, and enter your Support ID.

All finished! Enjoy your QNAP Land F/X installation.