We are using the Hunter I-20 heads. The catalog states that they have up to a 46' radius. I can only get them to show up to a 35' radius.
Accepted Answer
Guys, that's the MPR model, which doesn't have an 8.0 nozzle.
It does seem the 25, 35, 45 are getting duplicated in the nozzle list when placing from the Manager, but when you place from the Rotor button in the ribbon, they are only listed once.
--J
It does seem the 25, 35, 45 are getting duplicated in the nozzle list when placing from the Manager, but when you place from the Rotor button in the ribbon, they are only listed once.
--J
Yes. We're having the same problem here. Catalog allows for a radius of 44' using nozzle 8.0 with 45 PSI. But heads will not give a larger than 35' radius even trying to use the hotkeys "D".
Working great for me guys, sorry. I dropped in a I-20 at 45psi, 8.0 nozzle shows as 44' radius exactly as expected.
Confirm you are adding it at 100% radius.
--J
Confirm you are adding it at 100% radius.
--J
For the sizes on the drop down menu, I'm only seeing 25, 30 and 35 as options.... I do have it at 100% radius. Not seeing any options to change nozzles as you have indicated to make it 8.0.
Where did you pick the nozzle size? My only options were four 25's four 30's and four 35's. I confirmed that the radius was at 100% (which I usually don't do) and had a pressure of 55. Got only a 53' radius.
Mine show as the same as your's. I have four option each for 25's, 30's and 35's. Also confirmed 100% radius and my pressure was at 45. Still shows only a 35' radius.
Accepted Answer
Guys, that's the MPR model, which doesn't have an 8.0 nozzle.
It does seem the 25, 35, 45 are getting duplicated in the nozzle list when placing from the Manager, but when you place from the Rotor button in the ribbon, they are only listed once.
--J
It does seem the 25, 35, 45 are getting duplicated in the nozzle list when placing from the Manager, but when you place from the Rotor button in the ribbon, they are only listed once.
--J
Thanks Jeremiah. I see the 8.0 nozzle now that I've added the head without the MPR option.
- Page :
- 1
There are no replies made for this post yet.
Contact
- Land F/X
Our software tailors AutoCAD® to the needs of landscape architects, irrigation designers, and other professionals. We automate your most tedious tasks and ensure accuracy, giving you more time to design.