Morning/afternoon. I just recently was upgraded to 2023 and I'm in a drawing someone else has created via Land F/X. I have changed the lateral line to PRIME 100 PE 1404 and that stuck, but every time I attempt to remove 1/2" size from the list, it never stays removed. Unclear if this is a bug or perhaps a permissions issue due to the new install? Thank you!
Accepted Answer
Julie,
It is most likely errant pipe data, due to a previous bug.
To be sure, we would need you to send in your files via the Tech Support feature.
--J
It is most likely errant pipe data, due to a previous bug.
To be sure, we would need you to send in your files via the Tech Support feature.
--J
Julie,
Thanks for sending in your files.
We were able to find the cause of the issue was on our end, in the data entry of that particular class of pipe.
It has been corrected, and all is well!
--J
Thanks for sending in your files.
We were able to find the cause of the issue was on our end, in the data entry of that particular class of pipe.
It has been corrected, and all is well!
--J
Julie Riddle
selected the reply #4784 as the answer for this post — 2 years ago
Accepted Answer
Julie,
It is most likely errant pipe data, due to a previous bug.
To be sure, we would need you to send in your files via the Tech Support feature.
--J
It is most likely errant pipe data, due to a previous bug.
To be sure, we would need you to send in your files via the Tech Support feature.
--J
Julie Riddle
set the type of the post as
Issue — 2 years ago
- Page :
- 1
There are no replies made for this post yet.
Contact
- Land F/X
Our software tailors AutoCAD® to the needs of landscape architects, irrigation designers, and other professionals. We automate your most tedious tasks and ensure accuracy, giving you more time to design.