Is there any way to change/ edit the built in water meter flow and pressure loss data?
The local water company here uses high flow/ low pressure loss meters (see the attached cut sheet data). My current work around is to assign a generic POC and then manually add in the meter psi loss text in the Critical Analysis schedule... not exactly ideal.
Thanks much!
The local water company here uses high flow/ low pressure loss meters (see the attached cut sheet data). My current work around is to assign a generic POC and then manually add in the meter psi loss text in the Critical Analysis schedule... not exactly ideal.
Thanks much!
Currently, Turbo meters must be entered as a custom POC. From here you can simply add the proper GPM and PSI as it would be after taking account of the pressure loss.
We plan on eventually integrating these into the Meter section in some fashion, and possibly also integrating an ability to specify 2 meters operating together.
We plan on eventually integrating these into the Meter section in some fashion, and possibly also integrating an ability to specify 2 meters operating together.
- Page :
- 1
There are no replies made for this post yet.
Contact
- Land F/X
Our software tailors AutoCAD® to the needs of landscape architects, irrigation designers, and other professionals. We automate your most tedious tasks and ensure accuracy, giving you more time to design.