Clone Equipment (Formerly Known as Match Equipment)

• Clone Equipment Overview
• Keyboard Commands for Clone Equipment

Use our Clone Equipment tool (formerly known as Match Equipment) to grab the symbol and data assigned to one component (such as a head or valve) and then copy that component, along with all its data, into other locations in your drawing. In this way, you can place equipment quickly without having to open the Irrigation Manager.

Clone Equipment Overview

Clone Equipment now allows you to select drip area hatches and Schematic areas, as well as non-irrigation items such as Spot Elevations, Slope Callouts and Areas, and Detail Callouts.

Open the Clone Equipment tool:

 

F/X Irrigation ribbon, Clone Equipment flyout

 

F/X Irrigation menu, Clone Equipment option

 

 

 

or type FX_CloneEquip in the Command line

Select any component you've already placed in your drawing. You'll be prompted to place additional instances of that component, just as if you selected it manually.

Note that if you select a head and pick a fixed arc, you'll place that arc and radius head, but you'll have a chance to redefine the new head arc direction. If you select an adjustable arc head, whether spray or rotor, you'll have the chance to redefine the arc pattern for the new head.

Keyboard Commands for Clone Equipment

 

With Clone Equipment active, you can press K on your keyboard to display a list of keyboard commands (pictured to the right).

 

These are the same keyboard commands you can use when placing heads.

Remember to keep your left hand on the W-A-S-D keys, which will make it easy for you to begin tapping all these keyboard commands from memory.

 

The A and D keys toggle you "left" (decrease the radius) and "right" (increase the radius) respectively, and the rest of the commands are assigned intuititively to the surrounding keys. Soon, it will feel automatic!