Areas for Drip Emitters & Drip Spray

• Area for Drip Emitters
• Area for Drip Spray
• Related Webinars

We classify areas for drip emitters and areas for drip spray in the same category in the Irrigation Manager. Both are represented by hatches when placed in a drawing.

For instructions, see our Place Area for Drip Emitters or Drip Spray page.;

Areas for Drip Emitters

Applicable for emitters, bubblers, popups, and multi-outlet emitters, an Area for Drip Emitters is intended for entire planted areas where each plant will receive drip emitters or bubblers. When installed, these areas will consist of above-grade 1/2-inch poly drip tubing with single-outlet emitters to each plant, either directly connected to the drip tubing or attached to the tubing with 1/4-inch distribution tubing to drip stakes.

Areas for Drip Spray

Areas for Drip Spray apply to planted areas that will receive virtual head-to-head coverage of drip spray. These areas consist of above-grade 1/2-inch poly drip tubing with spray outlet emitters directly on the tubing or attached to the tubing with 1/4-inch distribution tubing to drip stakes. For instructions, see our Place Area for Drip Emitters or Drip Spray documentation

Related Webinars

• Designing with Drip: Learn to use drip irrigation, from placing drip rings, bubblers, single emitters, emitters by area, and dripline by area all the way to zoning and piping. (1 hr 3 min)
• Drip Irrigation: We’ll go through the entire process – from placing drip rings, bubblers, single emitters, emitters by area, and dripline by area to zoning and piping. (1 hr 5 min)
• Drip Irrigation Selection: Shelly Walker of GPH Irrigation goes over some applications that will help make your projects as efficient and environmentally responsible as possible. (50 min)